migrated from GitLab to Gitea

README.md

@@ -5,7 +5,7 @@ Library to build a real-time serial (or network) command-line interface (CLI) to
 configure or control your Arduino or compatible microcontroller.
 
 This is **Version 1.0**, the latest version, documentation and bugtracker are
-available on my [GitLab instance](https://gitlab.lindenaar.net/arduino/CLI)
+available on my [Gitea instance](https://gitea.lindenaar.net/arduino/CLI)
 
 Copyright (c) 2019 Frederik Lindenaar. free for distribution under the
 GNU License, see [below](#license)
@@ -45,8 +45,8 @@ Download / Installation
 At this moment this library is not yet available directly from the Arduino IDE
 but has to be installed manually. For this, download the latest distribution
 .zip file and install it using the following links:
-  * From my GitLab instance, download to your computer the
+  * From my Gitea instance, download to your computer the
-    [Latest .zip archive](https://gitlab.lindenaar.net/arduino/CLI/repository/archive.zip)
+    [Latest .zip archive](https://gitea.lindenaar.net/arduino/CLI/repository/archive/master.zip)
   * Follow the documentation for the Arduino IDE on
     [importing a .zip Library](https://www.arduino.cc/en/Guide/Libraries#toc4).
     Alternatively, you can also extract the downloaded .zip and follow the steps
@@ -55,7 +55,7 @@ but has to be installed manually. For this, download the latest distribution
 You can also use `git` to checkout the latest version from my repository with
 
 ```
-  git clone https://gitlab.lindenaar.net/arduino/CLI.git
+  git clone https://gitea.lindenaar.net/arduino/CLI.git
 ```
 
 so that it is easy to upgrade in the future. To find where to checkout check the
@@ -251,7 +251,7 @@ Currently both must hence be hardcoded static strings and there is no way to
 make them dynamic or change them. This is a conscious design choice to reduce
 the size of the code and the memory it requires. In case you have a good use
 case to reconsider this decision, let's discuss and for that please do
-(raise an issue here)[https://gitlab.lindenaar.net/arduino/CLI/issues].
+(raise an issue here)[https://gitea.lindenaar.net/arduino/CLI/issues].
 
 #### CLI is a `Stream`
 The CLI Object implements a Stream so it can be used as well to interact with
@@ -472,7 +472,7 @@ void loop() {
 
 I hope this clarifies how this library can and should be used. In case you find
 any issues with the documentation, code or examples, please do raise an issue
-[here](https://gitlab.lindenaar.net/arduino/CLI/issues).
+[here](https://gitea.lindenaar.net/arduino/CLI/issues).
 
 
 ### Parser Support Functions

library.json

@@ -2,7 +2,7 @@
   "name": "CLI",
   "description": "Library to buid a real-time serial (or network) command-line interface (CLI) to configure or control your microcontroller.",
   "keywords": "CLI, Commandline",
-  "homepage": "https://gitlab.lindenaar.net/arduino/CLI",
+  "homepage": "https://gitea.lindenaar.net/arduino/CLI",
   "authors": {
           "name": "Frederik Lindenaar",
           "url": "https://frederik.lindenaar.nl",
@@ -10,7 +10,7 @@
   },
   "repository": {
     "type": "git",
-    "url": "https://gitlab.lindenaar.net/arduino/CLI.git"
+    "url": "https://gitea.lindenaar.net/arduino/CLI.git"
   },
   "version": "1.0",
   "license": "GPL",

library.properties

@@ -5,7 +5,7 @@ maintainer=Frederik Lindenaar
 sentence=Library to build a Command Line Interface (CLI)
 paragraph=Library to bui;d a real-time serial (or network) command-line interface (CLI) to configure or control your microcontroller.
 category=Device Control
-url=https://gitlab.lindenaar.net/arduino/CLI
+url=https://gitea.lindenaar.net/arduino/CLI
 architectures=*
 license=GPL
 includes=CLI.h